Panasonic DMP-BD10PP Service Manual page 19

8.1.3. Service Modes at a glance
Service mode setting: While the power is off, press [SKIP FWD], [PAUSE] and [OPEN / CLOSE] simultaneously for five seconds.
Mode name
Release Items Item of Service Mode executing is cancelled.
Error Code Display Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in
sis Functions.
ROM Version Display 1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
6. SIGMA microprocessor version (left dis-
played)
White Picture Output White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
Item
Description
8.1.1. Self-Diagno-
FL display
If any error history dose not exist,
[F00] is displayed.
* are version displays.
*Initial mode is Interlace.
Switch Interlace/Progressive
* is changed to 11, 12, 13 and 14.
(11: D1, 12: D2, 13: D3, 14: D4)
*Initial mode is Interlace.
Switch Interlace/Progressive
* is changed to 11, 12, 13 and 14.
(11: D1, 12: D2, 13: D3, 14: D4)
19
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*D1/D2/D3/D4 is switched in order.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*D1/D2/D3/D4 is switched in order.