Panasonic DMP-BD10PP Service Manual page 17

Mode name
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly.
Aging Perform sequence of modes as * Aging
Description shown below continually.
Demonstration lock/ Ejection of the disc is prohibited.
unlock The lock setting is effective until unlocking the
tray
initialization
Item
Description
and not released by Main
of service mode.
FL display
Display in P-off mode.
Display following the then mode.
*When lock the tray.
unit
LOCK is displayed for 3 seconds.
*When unlock the tray.
UNLOCK is displayed for 3 sec-
onds.
*When press OPEN/CLOSE key
while the tray being locked.
Display LOCK for 3 seconds.
17
Key operation
Front Key
Press [POWER] key over than 10
seconds.
When the power is ON, press
[STOP], [POWER] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit's parameters are
initialized by TEST mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
When the power is on (SS mode),
press [SKIP FWD] and [OPEN/
CLOSE] keys simultaneously for 5
seconds.
Note:
When a disc is not in tray, this
setting is not effective.
When the power is on (SS mode),
press [SKIP FWD] and [OPEN/
CLOSE] keys simultaneously for 5
seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.