Honeywell ScanPal EDA51 Series User Manual page 88

•
•
•
•
•
Safe Cleaning Procedure
Always follow your organization's infection-control policies and instructions
provided by the disinfectant chemical manufacturer to determine the frequency
and duration with which the following cleaning procedure should be performed.
1. Turn off the computer.
2. Ensure that the battery is properly installed in the computer to prevent liquid
3. Apply the approved cleaning solution to a sterile cloth if one is not provided by
4. Wipe all surfaces of the Honeywell computer with the moistened cloth for the
5. Use a cotton-tipped swab to clean between the buttons and in other recessed
6. The cradle contacts should be cleaned monthly with a cotton-tipped swab
7. Let the computer completely air dry before turning the power and/or placing it
About the Touch Screen and Camera/Scanner Windows
After cleaning and disinfecting the Honeywell computer, it is recommended that
the display or lens area be cleaned with glass cleaner to remove any streaking left
from the previous cleaning process.
1. Lightly moisten a lint-free sterile cloth with the approved glass cleaner.
2. Wipe the display or lens area of the device briefly and quickly wipe dry to
78
Isopropyl Alcohol Wipes 70%
sodium hypochlorite solution 0.05%
Dimethyl benzyl ammonium chlorides 0.14%
Dimethyl benzyl ammonium chlorides 0.125%
Sodium hypochlorite 0.55%
from entering the electronics.
the disinfectant chemical manufacturer.
time required by the disinfectant solution.
• Avoid pooling the cleaning solution on any part of the product to prevent the
liquid from gaining access to the inside of the device.
• The touch screen, scanner and camera windows, buttons and connector area
require the most attention to avoid liquid entering the device.
• Keep a dry sterile cloth ready to dry the device after cleaning.
areas of the computer.
dipped in isopropyl alcohol to provide the ideal charger-to-battery contact.
in a charger.
remove streaks or spots.
EDA51 User Guide