STEP10: Press the [RESET] button on the CPU blade to reset.
The program update process starts. When the process completes, a dialog box appears for you
to confirm the illumination of the LED.
STEP11: Check that the S1 LED on the CPU blade lights to green.
STEP12: Return the [SENSE] switch to the original setting (0 to 4).
STEP13: Click the [OK] button.
[OK] button
A dialog box appears for you to confirm that the IP address of PC has been returned to default.
STEP14: Click the [OK] button.
[OK] button
A dialog box is displayed to notify the IP address has been changed.
STEP15: Click the [OK] button.
The program has now been updated.
[OK] button
4-63
Chapter 4 Standard Mode
[Upgrade] Category
NWA-033628-001 Rev.1.0