Loading The Lower Rack; Accomodating Extra Tall Items; Remove The Upper Rack; Install The Sprinkler - Bosch SHX33AI Use And Care Manual

Figure 11/llus. 11
AHAM DW-1 10 Place Setting
Figure 12/llus. 12
AHAM DW-1 12 Place Setting
Figure 13/llus. 13
Figure 14/llus. 14
r English
C. Loading the Lower Rack
Depending on the modet dishwasher you
have, the tower rack may have features and
accessories that witl add to its toading
versatility. These features and accesories
inctude fold-down flip tines and various
silverware baskets. Check with the Model
Features Chart on page 6 in this manuat to
find out which features and accessories
your dishwasher has.
Place large bowts, pots, and pans upside-
down in the lower rack. If your dishwasher
has lower rack flip tines, fold them down to
accommodate large utensits such as serving
spoons and large knives. Figure 11 shows
the toad pattern for 10 place settings, and
Figure 12 shows the toad pattern for 12
place settings.
D. Accomodating Extra Tall Items
If an item to be loaded into the tower
rack interferes with the upper spray arm or
is blocked by the upper rack, simply remove
the upper rack and install the Extra Talt Item
Spnnkler.
Remove the Upper Rack
The same procedure is used for removing
the Standard and RackMatic
TM
upper racks.
1. Putt the empty upper rack out of the
dishwasher to the point that it can be
tilted upward.
2. Putl the rack outward and up until the
rolters are completely free of the roller
guides.
3. Stide the rolter guides back into the
dishwasher tub.
Install the Sprinkler
1. Insert the Sprinkler into the upper
rack spray outtet at the back of the
dishwasher tub as shown in Figure 13,
and turn the Sprinkler clockwise.
2. Place your extra tall item(s) in the tower
rack as in Figure 14.
3. Setect a wash cyle and start the dish-
washer.
Note: When the cycle is complete,
remove the Sprinkler by turning it
counter-clockwise until it comes toose
from the upper rack spray outlet. Do
this before you reinstall the upper rack.
Otherwise, your dishwasher coutd be
damaged.
Reinstall the Upper Rack
1. Tittthe upper rack upwards and
position the upper rack roIters onto the
rotler guides.
2. Continue pushing the upper rack until
the rollers are on the guide.
3. Push the upper rack into the dish
washer tub.
20 Operation I Fonctionnement I Operacibn