Forced Operation - LG LQN120HV4 Owner's Manual

Jet Mode Operation
The unit will operate in super high fan speed in jet mode. To cancel
the JET Mode press the JET Mode button or the FAN SPEED button
or the room temperature setting button again and the unit will operate
in high fan speed in heating mode.

Forced operation

Forced operation is used when the remote controller
can't be used. The operation will be started if the
ON/OFF button is pressed. If you want to stop the
operation, re-press the button.
NOTE
• LED is turned on, off after 1 or 2 s, when you push
the ON/OFF button.
Cooling
Model
Operating mode Cooling
Indoor FAN Speed
Setting Temperature 22℃(72℉)
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as
remote controller sets. If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds,
then the buzzer sound 1 'beep'. If you want to stop the operation, re-press the button.
or
JET
MODE
Room Temp.
≥ 24℃(75℉)
Cooling
High High
22℃(72℉)
or
Heat pump Model
21℃(70℉) ≤ Room
Temp. < 24℃(75℉)
Healthy Dehumidification
High
23℃(73℉)
Operating Instructions
JET
MODE
ON/OFF
button
Room Temp.
< 21℃(70℉)
Heating
High
24℃(75℉)
Owner's Manual 17