Air Circulation Operation; Auto Clean Operation; Energy-Saving Cooling Mode; Display Temperature Unit - LG LQN120HV4 Owner's Manual

Operating Instructions

Air Circulation Operation

Auto Clean Operation

Energy-Saving Cooling Mode

Energy-saving cooling mode can save energy in cooling operation,
because it can operate efficiently by setting body-adaptation time
according to the change of time and temperature and adjusting
desired temperature automatically.
Energy Saving Cooling Mode operation can be started by pressing the ENERGY SAVING
COOLING MODE button on the remote controller.
Repressing it will deactivate the operation.

Display Temperature Unit

This function allows switching the display between
Celsius and Fahrenheit temperature unit.
14 Air Conditioner
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION button.
Once the air circulation is activated you can select the fan speed by
pressing the FAN SPEED button.
NOTE : During this operation, Operation lamp 'Blue' lights up.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still
running for about 15 minutes internally without cooling or
dehumidification operation. This function dries up any remains
of moisture & cleans the unit internally. If you push the Auto
Clean button again, this function is cancelled.
NOTE
o During Auto Clean function, only ON/OFF button, PURIFIER button, AUTO
CLEAN button is used. During this operation, Operation Lamp 'Blue' lights up
and blink.
).
°C/F(5 s)