Settings - Panasonic SC-HT405D-S Operating Instructions Manual

Step
POWER
SFC MODE
<
8
POWER
8
SPEAKERS
-HE LP
-BAND
–RESET
2 TUNING 1
–FM MODE PRESET
SPEAKERS
PHONES
– +
LEVEL
TV VCR DVD
AUDIO TUNER/BAND TAPE CD
DIRECT TUNING/
1 2 3
DISC ENTER
> = 10/ENTER
4 5 6
7 8 9 0
TOP MENU MENU
DIRECT NAVIGATOR PLAY LIST
ENTER
DISPLAY SUBWOOFER
/ /
– +
EFFECT LEVEL
yy
DISC/
SOUND MODE SFC TEST
DECK 1/2
TV/VIDEO CH MUTING
– +
VOLUME
– +
VOLUME
8
3
1 2 4
INPUT SELECTOR
>
INPUT SELECTOR
SFC MODE
DSP DOLBY
SOUND MODE PRO LOGIC2 BASS/TREBLE
MEMORY
BALANCE
Display
POWER
8
SFC MODE
< >
Press at the
same time.
SFC MODE
< >
TEST
SFC MODE
< >
INPUT SELECTOR
SFC MODE
< >
Press at the
same time.

Settings

1
SIZE
VOLU
DIGITAL INPUT
Set the size to suit your
speakers
+
– DVD 6CH
L R
LARGE: For speakers
reproduce a full sound range,
particularly the bass range
below 100 Hz.
SMALL: For speakers that cannot
adequately reproduce the
bass range. This setting is
sufficient for most speakers if
you are using a subwoofer.
NONE: For speakers you haven't
connected (center or surround).
The factory settings are: SMALL
For the subwoofer (SUB-WFR), select
YES if you have connected one (factory
setting), or NO if you have not.
Select.
Select the speaker.
Repeat.
Change the setting.
Repeat these steps for each speaker
channel.
2
DISTANCE
Enter the distance of the front,
that can
center and surround speakers
from the seating position
Change the distance so that the sound
from all the speakers (except for the
subwoofer) reaches you at the same
time.
You can select distances between
3 and 30 feet at one-foot intervals.
The factory settings are:
FRONT and CENTER: 10 FEET
SURROUND:
Enter the setting mode.
Select.
Select the speaker.
Change the setting.
Repeat these steps for each speaker
channel.
Exit the setting mode.
5 FEET
Repeat.