Panasonic SC-HT405D-S Operating Instructions Manual page 14

Control guide
Buttons not explained on this page are used only to operate other equipment.
Refer to the separate Remote Control Operation Guide for details.
[^]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and channels.
[EFFECT]
Use when adjusting Dolby Pro Logic 2, or
SFC effects.
[LEVEL]
Use when adjusting speaker level.
[–, +]
First select EFFECT or LEVEL, then press
[–] or [+] to adjust.
[CH, 2, 1]
For selecting preset radio channels.
[VOLUME, –, +]
To adjust the volume.
14
TV VCR DVD
AUDIO TUNER/BAND TAPE CD
DIRECT TUNING/
1 2 3
DISC ENTER
> = 10/ENTER
4 5 6
7 8 9 0
TOP MENU MENU
DIRECT NAVIGATOR PLAY LIST
ENTER
DISPLAY SUBWOOFER
/ /
– +
EFFECT LEVEL
yyy
DISC/
SOUND MODE SFC TEST
DECK 1/2
yyy
TV/VIDEO CH MUTING
– +
VOLUME
[TV, VCR, DVD,
TUNER/BAND, TAPE, CD]
Input mode and remote control mode
buttons.
[DIRECT TUNING/
DISC ENTER]
To enable selection of radio stations by
frequency.
[ > = 10/ENTER]
To enter two digit channels.
[SUBWOOFER]
For selecting subwoofer level.
Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and SW
MAX.
Select SW --- to stop output.
[SOUND MODE]
For selecting "STEREO", "SURROUND" or
"SFC".
[SFC]
For selecting SFC modes.
[TEST]
To start the speaker test signal.
[MUTING]
To mute the volume.
For your reference
When muting is on
Muting is also canceled when the unit is turned off.