Tape Deck - Panasonic SC-HT405D-S Operating Instructions Manual

Peripheral equipment and cables sold separately unless otherwise indicated.
Optical fiber cable
CD, Tape deck and antennas
Antennas
FM indoor antenna (included)
Using the antenna holder
Fit the holder into the holes on the rear
panel, then attach the antenna to it,
facing it in the direction of best reception.
Keep the antenna cord away from tape decks, DVD players, and other
cords.
Outdoor antennas ( \ page 16)
Connecting the AC power supply cord and other information
L
R
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Fix the other end of the antenna
where reception is best.
Adhesive tape
AM loop antenna (included)
When attaching the
AM loop antenna to
another surface
Screw
(included)
R L
R L
L
R
AC power supply cord
(included)
Connect this cord after all
other cables and cords are
connected.
Coaxial cable

Tape deck

If you have a graphic equalizer, connect it to the
TAPE terminals.
L
R
DIGITAL OUT
"SWITCHED" AC outlet
Power to the outlet is controlled by the power
switch of this unit. Audio equipment rated up
to a maximum of 80 W can be connected
here. If equipment exceeding this rating is
connected, the outlet may be rendered
inoperable. Consult your dealer to replace the
fuse.
Conserving power
The unit consumes 1 W even when it is turned off with [POWER, ^/l]. To save
power when the unit is not to be used for a long time, unplug it from the
household AC outlet.
If the unit is left unplugged for longer than a few weeks, all settings will revert
to the factory settings. Do the settings again if this occurs.
PLAY (OUT)
REC (IN)
R L
R L
L
R
CD Player
L
R
CAUTION:
TO PREVENT ELECTRIC
SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
Household AC outlet
(AC 120 V/60 Hz)
LINE
OUT
7