Table of Contents
Advertisement
Selecting an amount of time to skip—
Time Slip
[RAM] [DVD-R]
1
During play
Press [TIME SLIP].
2
Within 5 seconds
Press [3, 4] to enter the time and
then press [ENTER].
Press to alter in one-minute units. Press and hold to alter in
10-minute units.
Fast forward and rewind—SEARCH
[RAM] [DVD-R] [DVD-A] [DVD-V]
[VCD]
During play
Press [6] or [5].
≥Press and hold [D] or [E] on the main unit.
[Note]
≥The speed increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥Audio is heard only while using first level fast forward (other than
CD, MP3). You can turn this audio off if you want to ( page 45,
Audio—PLAY k1.3 & Audio during Search).
Quick View
[RAM] (Only with Dolby Digital)
You can increase the speed of play without disrupting the
soundtrack.
During play
Press and hold [1] (PLAY/ k1.3).
To return to normal speed
Press [1] (PLAY/k1.3).
[Note]
≥Output is in PCM when using a digital connection ( page 51, [A]).
≥This is canceled if you perform operations to change the
soundtrack, skip or pause.
≥This does not work if the setting is "Off" in "PLAY k1.3 & Audio
during Search" ( page 45).
≥This does not work when recording is in XP or FR mode during
simultaneous rec and play ( page 23).
0 min
e.g., Go back to 5 minutes
–5 min
[CD] [MP3]
DVD-RAM
DVD-RAM
PLAY t1.3
PLAY
L R
L R
Marking places to play again—MARKER
You can mark positions by pressing [MARKER]. Also use on-screen
menus to mark, recall, and clear positions.
[RAM] [DVD-R]
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
[DVD-A] [DVD-V]
[VCD]
[CD] [MP3]
Mark up to 5 positions. The markers clear when you open the disc
tray.
Marking positions directly
During play
Press [MARKER].
One marker is added.
Using on-screen menus to mark positions
1
During play
Press [DISPLAY].
The on-screen menus appear.
2
Press [3, 4] to select the "Play" and
press [1].
e.g., DVD-RAM
Disc
Repeat play
Play
Marker
Video
Audio
3
Press [3, 4] to select "Marker" and
press [1] to highlight the first aster-
isk (¢).
[RAM] [DVD-R]
††††††††††
1s10
4
Press [2, 1] to select an asterisk (¢)
and press [ENTER].
One marker is added.
When marking positions 11 and above
[RAM] [DVD-R]
1 Press [2, 1] to highlight "1–10".
2 Press [3, 4] to select "11–20".
You can select the next group of 10 when the current group is
full.
3 Press [1].
The first asterisk is highlighted.
4 Press [ENTER] to mark a position.
To recall a marker
Press [2, 1] to select a marker number and press [ENTER].
≥Play starts from the marked position.
To clear markers
Press [2, 1] to select a marker number and press [CANCEL].
≥An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
[Note]
≥You cannot use this feature if:
– the disc's elapsed play time is not shown in the display.
– you are using a play list. [RAM]
– protection (cartridge
page 10, disc
can still recall the markers to play a position). [RAM]
≥Subtitles around markers may fail to appear.
≥Markers are cleared when you finalize DVD-R ( page 38).
≥Markers on DVD-RAM and DVD-R are ordered by time, so
marker numbers can change when you add and delete them.
OFF
††††††††††
1s10
[DVD-A] [DVD-V]
[VCD]
[CD] [MP3]
†††††
1s10
1 2
page 38) is set (you
21
RQT6981
Advertisement
Table of Contents
