Special Features; Aspect Button; Bbe Button; Sap Button - Panasonic CT-30WC14 Operating Instructions Manual

S F
PECIAL EATURES

Special Features

ASPECT Button

Customer Options depending on Component Input Signal
INPUT
DISPLAY ON SCREEN
SIGNAL
1080i 16:9 only
480p (16:9) Default to 16:9
Default to FULL mode.
480p (4:3) Note: Will stretch picture
horizontally.
480i Default to JUST mode
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.
ASPECT
Image on
Input Signal
16:9 Screen Size
480i or 480p 4
4:3
ASPECT
Image on
Input Signal
16:9 Screen Size
16
480i or 480p
ZOOM
Note: If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu.
ASPECT
Image on
Input Signal
16:9 Screen Size
480i or 480p 16
FULL
ASPECT
Input Signal Image on
16:9 Screen Size
16
480i
JUST

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes.
For example:
• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button will
toggle the audio as follows:
STEREO
10
ASPECT BUTTON
OPTIONS
No options
4:3, Full or Zoom (see
below)
4:3, Full or Zoom (see
below)
4:3, Full, Just or
Zoom (see below)
This will display a 4:3 picture
at its standard 4:3 size with
black side bars.
recommended for viewing
4:3 pictures as it may create
3
a permanent image
screen if displayed for a
prolonged period of time.)
This will expand the 4:3
picture uniformly (width and
height) to full screen width
and then reposition the
picture vertically.
9
(Recommended for letterbox
pictures.)
This will show picture at full
screen size. (Recommended
for anamorphic pictures.)
9
This will stretch the right and
left edges of a 4:3 picture to
fill the screen, The center of
the screen will have aspect
correction applied. The size
9
of the picture will depend on
the original signal.
(Recommended for regular
TV viewing.)
SAP MONO

Split Operation

This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
SPLIT
• Press
• Choose channels for the SPLIT frame by pressing
SPLIT CTRL
in Split frame, then use
control numeric keypad.
Note: Split frame channel can only be changed while right
indicator (
(Not
Change Split Frame channel
on
• Select channels for the Main picture by pressing
CH
or
CH
SWAP
• Press
PICTURE source.
RECALL
• Press
SPLIT
• Press

Split Operation With a Cable Box

To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note: Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the Split frame.
Procedure
• Tune TV to Channel 3.
SPLIT
• Press
frame.
Note: Audio is from the Main Picture only.
• Verify that the Cable box is ON.
• Choose channels for the Main Picture by tuning the
cable box.
• Choose channels for the SPLIT frame by pressing
SPLIT CTRL
control numeric keypad.
Note: Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all SPLIT
functions.
to display Split frame.
button. The right indicator (
CH
or
CH
)is displayed in split frame.
Change Main Picture channel
or use the remote control numeric keypad.
to switch the SPLIT FRAME and MAIN
to view picture source status.
to cancel Split frame.
on the remote control to display Split
CH
button, then use
or
CH
) will appear
or the remote
or the remote