Operating Peripheral Equipment Using The Remote Control; Programming The Illuminated Remote Control Using Access Codes - Panasonic TH-37PA20U/P Operating Instructions Manual

Operating peripheral equipment using the remote control

Programming The Illuminated Remote Control Using Access Codes

The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1
Confirm that the external component is plugged in and operating.
2
Turn the component off.
3
CH
+
POWER
VOL
CH
4
5 1 2 3
4 5 6
7 8 9
0
6
POWER
Default Modes For Remote Control
Device
TV
DTV
CABLE
DBS
VCR
DVD/CD
AUX
RCVR
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat the
procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30
seconds,the programming will fail.
54
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
VOL
Release the POWER and ACTION keys.
Press the mode key.
The mode key will illuminate steadily, all others will go out.
Enter the 3-digit component code using the Remote Control numeric keypad.
Press the Remote Control
the component will turn on.
Operates
TV (Panasonic Only)
DTV (Panasonic Only)
CABLE (Preset)
DBS (Preset)
VCR (Preset)
DVD and CD (Preset)
Personal Video Recorders,
Tape and VCR2
Audio Receiver (Preset)
to test the component. If the procedure is successful,
POWER
Default
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code