Motor Connections; Inside Delta Motor Wiring - Siemens 72G Series Setup Manual

s

Motor Connections:

Inside Delta Motor Wiring

The motor wiring should be connected exactly as shown in Figure 4. If it is not, the starter will
detect a motor wiring error. If you have elected to cycle the fault contactor on each start, you
must contact technical support for directions on configuring the starter and wiring in a required
off delay timer.
Figure 4: Power Wiring for In-Delta Configuration
________________________________________________________________________________
Siemens Energy & Automation, Inc. 3333 Old Milton Parkway Alpharetta, GA 30202
10