Answer A Call; End A Call; Temporary Ringer Silence; Redial - Alcatel F890 Voice User Manual

4.2.2 Direct Dialing
<phone on>
Press to take the line and enter the phone number.

4.3. Answer a Call

When you receive a call, the phone rings and the display show Incoming call and "incoming call'. If you've
got a caller display service, the display shows the caller's number if it's available or the caller's name if it
matches an entry stored in your contacts list.
If the handset is not on the charging cradle:
When the phone rings, press <phone on> (or press the key twice in handsfree mode) to answer a call.
If the handset is on the charging cradle or the base station and if Auto answer under Call settings is set to
on: When the phone rings, pick up the handset to answer a call.
Or to block the call*, press <Block>, see Section 11 Call Control Settings.
*If you have subscribed to a Caller Display Service.

4.4. End a Call

During a call connection, press <phone off>.
OR
Put the handset on the base station to end a call.
4.5. Adjust Earpiece and Handsfree Volume
There are 5 levels to choose from for each of earpiece and handsfree volume.
During a call:
<up> or <Calls>
Press
setting will remain at the last selected level.
4.6. Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Select Muted by pressing right option key to mute the microphone and Call Muted will display on the LCD.
Your caller cannot hear you. Select Unmute to unmute the microphone.

Temporary Ringer Silence

4.7.
When the telephone is ringing, you can temporarily set silence for the ringer of the handset without
disconnecting the call. The next call rings normally at the preset volume.
To silence the ringer:
Select Muted by pressing right option key on the handset during ringing.
◼
4.8.

Redial

Each handset stores the last 30 dialed numbers (up to 30 digits each) in the redial list.
4.8.2. Review the redial list
1. Press <Calls> or Select Calls by pressing right option key in idle mode.
2. Press <up> or <Calls> to browse the list.
to select volume 1-5. The current setting is shown. When you end the call, the