Whirlpool MW8500XP Use & Care Manual page 8

Touch Number Pads
for the cooking time you
want.
4.
Touch COOK POWER.
5. Touch a Number Pad for
the Cook Power you
want.
The Display will show the numbers
you touched in the order you
touched them. This example shows
7 mrnutes. 30 seconds.
The COOK POWER Signal Light will
come on and the Display WIII show
two 0's.
The display will show what you
touched. This example shows 50%
of full power.
The COOK and COOK POWER
Signal Lights will stay on to show
that the oven is cooking at a Cook
Power other than high.
The Display counts down the time
to show how much cooking time is
left.
For 2 of every 10 seconds, the Dis-
play will show the Cook Power you
selected.
When the cooking time ends, you
will hear 4 beeps. (You can stop
the beeping by opening the door
or by touching CANCEL.) When
the beeping stops, the Display will
show the time of day.
Changing cook powers
l
Cook Power can be changed at any time during the cooking cycle.
-Touch COOK POWER.
-Touch a number for the new Cook Power.
-Touch START. The oven will cook at the new Cook Power for the original time
OR...
-Touch COOK POWER twice, then touch START, if you want to change a lower
Cook Power to high.
8