Kenmore SELECT CLEAN 665.75822 Use & Care Manual page 16

USING YOUR RANGE
ULTRABAKE™ BAKING/ROASTING (contd.)
4
. When roasting, preheating the oven is not
5
. Press START/ENTER.
A preheat mode is entered after the oven
temperature has been set and START has been
pressed. Once the preheat conditioning ends,
the selected oven temperature replaces "PrE
HEAt" on the display. You will hear a 1-second
tone, indicating the oven is ready to use.
The ULTRABAKE™ system electronically
regulates the preheat and temperature to maintain
a precise temperature range for the best cooking
results.
NOTES:
•
You can change the temperature setting any
time after pressing START/ENTER. You do not
have to press START/ENTER again.
•
While the oven is in the preheat mode, you can
see the set temperature for 5 seconds by
pressing BAKE.
6.
When baking, put your food in the oven after
7.
After cooking, turn off the oven.
16
necessary unless your
recipe recommends it.
NOTE: The oven will heat
normally even though
"PrE HEAt" is displayed
and then maintain the
selected cooking
temperature.
the preheat conditioning
ends. During baking/
roasting, the oven burner
will turn on and off to keep
the oven temperature at
the setting.
Roasting meats and poultry
•
For even cooking, place the meat on a rack in a
shallow pan. This keeps the meat out of the
drippings and allows the heat to circulate better.
•
Use a meat thermometer for the most accurate
doneness. Insert it so the tip is in the center of
the largest muscle or thickest portion of the meat
or poultry. Make sure the thermometer is not
touching bone, fat, or the bottom of the pan.
PRESS YOU SEE
YOU SEE
(example for set temperature
of 350°F)
Saving energy
•
To avoid loss of heat, open the oven door as little
as possible.
•
Use the timer to keep track of cooking time.
•
Plan your meals for the most efficient use of the
oven by cooking more than one food at a time, or
baking while the oven is still hot after cooking a
meal.
PRESS YOU SEE
(time of day)
HEAT
ON
BAKE
BROIL
F
HEAT
ON
BAKE
BROIL