Sistore Dvr Configuration; Configuration Checklist - Siemens DMS8000 MP4.30 Connectivity Manual

Configuring CCTV network
2.8

SISTORE DVR configuration

2.8.1 Configuration









Building Technologies
Fire Safety & Security Products
The Siemens SISTORE is a family of Digital Video Recorders capable of acquiring
the video signals from a number of input cameras, showing the images on a local
monitor, and storing them in digital form on a local hard disk for later analysis. Also,
direct alarm inputs and outputs can be managed.
The host connection is based on a TCP/IP connection on a LAN network.
The following SISTORE models are current integrated in the DMS8000 Video Net-
work:
– SISTORE AX
– SISTORE CX
– SISTORE MX
– SISTORE MX Pro
– SISTORE MX NVS
– SISTORE SX
Although the models feature different characteristics, their configuration in Com-
poser is quite similar and it is discussed in this section for all of them.
c
hecklist
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration procedure that follows.
ITEMS NEEDED FOR CONFIGURATION
The SISTORE software tools installed and operating properly with the DVR units.
E.g.: RAS software (AX), RemoteView software (MX/MX Pro), SISTORE Config pro-
gram (SX/CX), etc.
The SISTORE model and line capacity
The allocation of SISTORE units on Server/FEP stations and related video drivers
The number of video inputs and outputs
The SISTORE parameter settings, including:
IP address and TCP port
–
Username and password for the SISTORE configuration
–
Username and password for live-setting administration
–
Username and password for playback-setting administration
–
The camera and monitor connections
The alarm input logic (NO: Normally Open or NC: Normally Closed)
The alarm output pulse duration
Plug-ins needed:
Plug-in #251901, which must be installed before you can configure your system
–
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
25
06.2010