Husqvarna DM700 Operator's Manual page 3

Product overview
1
14
15
1. Drill spindle
2. Gearbox
3. Leak indicator
4. Product body
5. Handle
6. Work load indicator
7. Iron button
8. Gear selector, electronic gears
9. ON/OFF switch
®
10. GARDENA male coupling with water valve
11. Connection for power supply
12. Selected electronic gear
13. Quick mounting plate for Husqvarna drill stand
14. Gear selector, mechanical gears
15. Installation plate for Husqvarna drill stand
®
16. GARDENA water connector
17. Hex key, 8 mm
18. Wrench
19. Friction ring
20. Operator's manual
Symbols on the product
WARNING! This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
1320 - 001 - 14.10.2019
2
3
13
16
17
4
5
6
7
8
9
12
11
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always use approved personal protective
equipment. Refer to
equipment on page 7 .
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at an approved disposal
location for electrical and electronic
equipment.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
20
19
10
18
Personal protective
3