Power Off; Panel Lock; Pot Sizing; Keep Warm - Bosch NES 730 UC Use And Care Manual

NES Cooktop Use and Care Manual
Operation Without mTwisT Dial
The cooktop can be operated without the mTwisT dial.
1. Turn off Panel Lock (see below).
2. Touch element pad for desired element. Display shows 0.
3. Choose the POT SIZING pad (if using dual element).
4. Touch element pad repeatedly until desired heat settting
is displayed.
Change Heat Setting
1. Select element pad for desired element.
2. Each touch of the element pad changes setting.
Continue touching repeadedly until desired heat setting
is displayed.
Cooktop Function Pads

Power Off

Turns off all elements at the same time. The indicator light
above the POWER OFF pad is lit when at least one element
is on. The light will turn off when the POWER OFF pad is
touched or all elements are turned off.

Panel Lock

The panel lock is selected to prevent the cooktop from
being turned on, such as for cleaning. The elements will
not function when turned on.
Setting Panel Lock
1. Touch and hold PANEL LOCK pad for three seconds.A
light above the pad stays lit when the panel is locked.
2. To unlock Touch the PANEL LOCK pad and hold for
three seconds. The light above the pad will disappear.
The cooktop cannot be locked when a surface element is
operating. It is recommended to lock the cooktop
before cleaning.

Pot Sizing

Use this pad to choose the pot size on dual elements.
1. Touch element pad for dual element. Control defaults to
larger element. Dual element light comes on above element
pad indicating large size is selected.
2. Touch POT SIZING pad to change to smaller element.
Dual element light will turn off.
3. Turn mTwisTdial to desired heat setting.
To change element size for different size cooking pot when
the element is on:
1. Touch element pad. Display will show 0.
Setting the Controls
Change Pot Size - (for dual elements only)
1. Select element pad for desired element.
2. Touch Pot Sizing pad for desired pad.
3. Touch element pad until desired heat setting is displayed.
Turn Off Element
2. Touch POT SIZING pad to change element size chosen,
element turns off.
3. Turn mTwisT dial to desired heat setting.

Keep Warm

Each element has a keep warm setting to keep hot, cooked
foods at serving temperatures.
To set Keep Warm feature:
1. Touch element pad for desired element.
2. Touch KEEP WARM pad. L is displayed above selected
element and element comes on.
Keep Warm Guidelines
Use pans/utensils with flat bases. Plates and casseroles
with shallow ridges around the base can be used provided
they are made of heat-safe materials.
Keep dish covered to keep foods hot.
Choose pans and cookware that may be safely used on a
hot surface. Example: Use CorningWare® "Safe for
Rangetop" rather than Pyrex® which is not recommended
for cooktop use.
Use a trivet or steamer inside a pan when necessary to
raise food off bottom of pan.
PAGE 6
Cooktop Operating Instructions
1. Touch element pad.
2. Touch element pad until 0 is displayed.
Or
for several elements, select POWER OFF pad.