Husqvarna 241R Workshop Manual page 5

1
!
4
WARNING!
Protective glasses should be worn when working on the starter to avoid injury to the eyes if,
for some reason, the return spring should fl y out.
Dismantling
Remove the starter from the engine.
502 50 18-01
NOTE!
Ensure the bushings that guide the starter towards the fuel tank are not lost.
Loosen the spring tension.
Remove the bolt in the centre of the star-
ter pulley and remove the starter pulley.
502 50 18-01
Starter
Demontering
Remove the 4 screws and carefully swing
down the protective plate so far that the
starter can be lifted out.
The cylinder cover does not need to be
loosened or detached.
Loosen the spring tension.
Pull out the starter cord about 30 cm.
Brake the starter pulley with your thumb
and lift the cord as illustrated.
Let the starter pulley rotate backwards
slowly.
Remove the bolt in the centre of the star-
ter pulley. Lift the starter pulley carefully
from the starter cover.
!
WARNING!
Wear protective glasses.
The return spring lies tensioned
in the starter and can fl y out
and cause personal injury with
careless handling.