Husqvarna 241R Workshop Manual page 22

Fuel system
Zama C1Q-EL36
Attach the various parts of the measuring
unit in the reverse order as set out for
dismantling.
The lever arm should lie fl ush with the
carburettor housing.
• Mount the valves and dampers.
Replace the fuel screen if it is damaged or
cannot be cleaned.
Place the pump diaphragm closest to
the carburettor housing. Then the gasket
and cover and the other components in
reverse order of removal.
NOTE!
Check that the valves are turned
correctly and that they close
completely and tightly in the
closed position.
Use Loctite on the valve screws.
Attach the various parts of the measuring
unit in the reverse order as set out for
dismantling.
The lever arm should lie fl ush with the
carburettor housing.
Too high setting = too much fuel.
Too low setting = too little fuel.
3
21