Connecting/Removing A Usb Data Carrier - Blaupunkt BREMEN SQR 46 DAB Operating Instructions Manual

Con guring the display
Press the DIS button to toggle between the displays:
Display Meaning
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
ABCDEF Station name
Radio text, only if
RADIO TEXT
available
Memory location/
P1 FM1 89.90
memory bank/frequency
Memory location/
P1 FM1 08:40
memory bank/time
Changing to MP3/WMA/iPod mode
Press the SRC button repeatedly until the desired audio source is dis-
played:
• "SD(HC)": Inserted memory card
• "USB FRONT" or "USB REAR": USB data carrier connected to
the front or rear.
• "IPOD FRONT / IPHONE FRONT" or "IPOD REAR / IPHONE REAR":
Connected iPod / iPhone at the front or rear side
• "AUX": Connected external audio source.
iPod mode
You can connect numerous iPod and iPhone models to the car sound sys-
tem via the USB port in the front of the device and the USB port at the
rear and control the audio playback from the car sound system.
10
BR460 BR460
Con guring the display | MP3/WMA/iPod mode
AUTORADIO
Note:
• A list of compatible iPod and iPhone models is located at the end of
these instructions. Blaupunkt can not guarantee the awless func-
tion of other iPod and iPhone models.
• If an iPhone and iPod are connected at the same time, the devices
are charged via the USB ports. If two iPhones are connected at the
same time, charging is not possible.
Use a suitable adapter cable to connect your iPod or iPhone with the
USB port of the car sound system.

Connecting/removing a USB data carrier

Bedienungsanleitung
Note:
• You can connect USB data carriers to the USB port at the front of
Operating instructions
the device as well as the rear USB port.
Connecting a USB data carrier
Mode d' emploi
Switch o the car sound system so that the data carrier will be corr-
ectly registerd.
First, pull the protective cap of the USB port : to the front until it
Istruzionl of uso
moves out of the port and fold it to the right to connect a data car-
rier to the USB port at the front of the device.
Gebruiksaanwijizing
Connect the USB data carrier.
Turn on the car sound system. If the USB data carrier is initially sele-
cted as audio source ,the data are read rst. Bruksanvisining
Note:
• If the connected USB data carrier cannot be seen, "USB ERROR" is
brie y displayed.
• The time required for reading in the data depends on the design
and size of the USB data carrier.
10
41
22.05.19 17:00 22.05.19 17:00