Philips HD7696 User Manual page 8

ENGLISH
8
Adjustable keep-warm time and freshness indicator
You can adjust the time during which the appliance keeps the coffee warm on the hotplate to a
maximum of 2 hours. The default keep-warm time is 30 minutes.
Press and hold the clock button until the keep-warm time starts flashing on the display,
1
then release.
Press the + button or - button to adjust the keep-warm time. Every press of the button adds
2
10 minutes to the keep-warm time.
Tip: Press and hold the + or - button to fast forward the time.
Press the clock button to confirm.
3
Note: The appliance automatically saves the set keep-warm time after 12 seconds.
If you select a keep-warm time over 30 minutes, the freshness indicator will be activated after
30 minutes. The slowly flashing on/off button lets you know the freshness of your coffee is declining.
Freshness indicator
To switch off the freshness indicator, follow below steps.
Unplug the appliance.
1
Press and hold the on/off switch and put the plug back in the wall socket.
2
The display shows OFF.
,
To switch on the freshness indicator, follow below steps.
Unplug the appliance.
1
Press and hold the on/off switch and put the plug back in the wall socket.
2
The display shows ON.
,
Flushing the appliance before first use
Remove the water tank from the appliance (1) and remove the lid of the water tank
1
(2) (Fig. 6).
Fill the water tank with fresh, cold tap water (Fig. 7).
2
Put the lid on the water tank (1) and put the water tank back onto the appliance (2) (Fig. 8).
3
Do not put a filter and ground coffee in the filter holder.
Press the on/off switch downwards to switch on the appliance (Fig. 9).
4
Let the appliance operate until the water tank is empty.
5
Press the on/off button downwards to switch off the appliance (Fig. 10).
6
Clean the jug and the filter holder (see chapter 'Cleaning'). (Fig. 11)
7
Let the appliance cool down for at least 3 minutes before you start brewing coffee.
8
Using the appliance
Brewing coffee
The intensity switch lets you set the way the water flows through the coffee bed: a wide water
distribution setting gives a smooth, mild taste, while a concentrated distribution results in a strong
intense taste.
Make sure the plug is in an earthed wall socket.
1
Make sure the jug is under the filter holder.
2