Make Power Cord Electrical Connection - Whirlpool TUD8700SQ Installation Instructions Manual

6 Install conduit connector
Install a U.L. listed or CSA approved conduit connector.
Make sure screwheads are facing to the left when tightening
conduit nut. Conduit connector may be provided with the
power supply cord kit.
What type of electrical
connection will you use?
Power Supply Cord:
Follow Option A instructions
Direct Wire:
Follow Option B instructions
Make Power Supply Cord Connection
Option A, Power Supply Cord:
1
Power Cord—Route cord
into terminal box
Route cord so that it does not touch dishwasher motor
to lower part of dishwasher tub. Pull cord through
conduit connector in terminal bow.
Select UL listed or CSA approved twist-on wire connectors
(not included) rated to connect your household wiring to
16-gauge dishwasher wiring.
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
2
Power Supply Cord—
Connect ground wire
Remove the green grounding screw and place through
the ring terminal of the green ground wire. Reattach and
tighten the green screw.
3
Power Cord—Connect
remaining wires
NOTE: Do not pre-twist stranded wire. Twist on wire
connector. Gently tug on wires to be sure both are
secured.
Connect wires black to black and white to white, using
UL listed or CSA approved twist-on wire connectors (not
included).
Ground
Ground
wire
wire
Washer
Ground
connector
11