Faults; Fault Clearance; Faqs - Siemens SICHARGE CC AC22 Operating Manual

Faults

5.1

Fault clearance

Procedure in the event of a fault
If the charging station experiences a fault, proceed as follows:
1. Check the icons on the display. You can find an overview of the icons in the table in the
Main menu (Page 13) chapter.
2. In the FAQs (Page 17) chapter, you will find a selection of possible causes of faults.
3. If you are unable to rectify the fault yourself, contact the operator's service hotline.
5.2

FAQs

Frequently Asked Questions (FAQ)
The following table shows an excerpt of possible messages.
The symbols, their meanings and solutions are described in the three columns.
Symbol
17
Meaning
Vehicle not connected
Vehicle connected
Vehicle is being analyzed
Vehicle accepted
(≤ 32 A @ 3 Ph/22 kW)
Vehicle accepted (i-MiEV Legacy
Mode, ≤ 16 A @ 1/3.7 kW)
Vehicle accepted (Mode 3 Simpli-
fied, ≤ 16 A @ 1 Ph/3.7 kW)
Solution
Connect the charging cable to the vehicle.
Check the charging cable.
-
Wait a moment.
-
-
-
SICHARGE Operating Manual ERK
Operating Manual, 07/2020, A5E48572458-AB
5