Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Neilsen CT1057
Summary of Contents for Neilsen CT1057
- Page 1 TWIN WELDING HOSE REEL 1/4” x 25FT CT1057 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: TWIN WELDING HOSE REEL 1/4” x 25FT Model: CT1057 Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 12100 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. -
Page 3: Safety Rules
Using the Operator’s manual The operating manual is an important part of your Twin Welding Hose Reel and should be read thoroughly before initial use, and referred to often to make sure adequate safety and service concerns are being addressed. Reading the owner’s manual thoroughly will help avoid any personal injury or damage to your pump. -
Page 4: Specific Safety Instructions
When using tools, basic precautions should always be followed, including the following: To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. SPECIFIC SAFETY INSTRUCTIONS 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. -
Page 5: Air Source
TOOL USE AND CARE 1. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. 2. Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. - Page 6 1. Remove the Bolts on the Support Post and reposition to move the guide rollers, if needed, for the desired mounting location (wall, floor or ceiling). 2. Replace the Bolts and tighten. MOUNTING REEL 1. Choose a mounting location that is free of electrical wiring or other obstructions, and is sturdy enough to support the weight of the Reel and hose as well as the force used to extend and retract it.
-
Page 7: Cleaning, Maintenance, And Lubrication
MAINTENANCE WARNING! To prevent serious injury : Detach air supply from this product before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from tool failure: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. - Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...