Using Delay Start; The Reset Options Button - Whirlpool DU7903XL Use & Care Manual

Water HLating Hold Signal light DELAY STAR\T Signal light
Cycle C&trol Knob
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63°C) in both
washes and the last rinse (marked ').
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 70
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 60 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 55
minutes.
RINSE 6 HOLD Cycle
For rinsing a few items to be washed
one
or more days later.
Cycle time is about 10 minutes.
Use AIR DRY only Do not use HI-TEMP WASHING Option.
Using DELAY START
1. Push Cycle Selector Button.
2. Push Option Selector Button for desired op-
tion or options.
3. With the Control Knob pushed in, turn clock-
wise to the number of hours (from 1 to 6
hours] you want the dishwasher to delay
before the selected cycle starts.
4. Pull out the Control Knob. The DELAY START
Signal Light will come on until the selected
cycle starts.
NOTES:
l
You can add items while time is counting
down. Close and latch the door. The timer
will not advance if the door is unlatched.
l
RINSE& HOLD and LOW ENERGY WASH
Cycles can't be delayed.
The RESET OPTIONS Button
If you want to change a selected option, push the RESET OPTIONS Button.
Re-select an option, if desired.
9