The Air Dry Option; The Reset Options Button; Using Delay Start - Whirlpool DU8900XT Series Use & Care Manual

\
CLEAN SlkNAl LIGHT
W\ATER HEATING HoLD'DELAY WASH
SIGNAL LIGHT
SIGNAL LIGHT
DOOR LATCH
RINSE 81 HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 15 minutes.
Use AIR DRY only. Do not use HI-TEMP WASH Option
HI-TEMP WASH Option
If water is already hot enough, the cycle
When this option is selected, water for the
continues without delay. The WATER HEATING
main wash and the final rinse is heated to145'F
HOLD Signal Light will be on while the cycle
(63°C).
delays for water heating.
The AIR DRY Option
Air in the dishwasher is automatrcolly heated
Some items (such as plastics] may need towel
during the"dry" part of all cycles except RINSE
drying.
& HOLD and CHINA CRYSTAL
For best results, use a liquid rinse aid such as
If the AIR DRY Option is selected, arr In the
Jet-Dry. p
dishwasher is not heated. Using this option helps
save energy, but dishes take longer to dry [over-
night) and some water spotting may result.
The RESET OPTIONS Button
If you want to change a selected option,
push the RESET OPTIONS Button. Re-select an
option, if desired.
Using DELAY START
4. Close and latch the door. The DELAY WASH
Signal Light will come on until the selected
cycle starts.
NOTE:
* You can add items while time is counting
down. Close and latch the door. The timer will
not advance if the door is unlatched.
l
RINSE & HOLD and LOW ENERGY WASH Cycles
can't be delayed.
1.
Push desired Cycle Selector Button.
2. Push desired Option Selector Button(s).
3. Turn Control Knob clockwise to the number of
hours [from 1 to 6 hours] you want the dish-
washer to delay before the selected cycle
starts.
Changing a setting
You can change a setting anytime during
any cycle.
1. Lift up on the door latch to unlatch the door
and stop the cycle. Don't open the door until
the spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Press door firmly to latch it. The dishwasher
will automatically start the new cycle.