Table of Contents
Advertisement
3
i
n s t a l l a t i o n
3.1 i
n s ta l l i n g
– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
• Remove the fastening screws
the head-end station.
• Insert the cassette in this slot and push it into the housing.
• Align the cassette and apply slight pressure to connect it to the connections
of the board and the RF bus bar.
• Fasten the cassette with the screws
1
1
t h e
C a s s e t t e
of an unoccupied slot from the bracket of
1
.
1
- 6 -
CCAV 300
Advertisement
Table of Contents
