Audio Type; Setting The Audio Output Level; Saving Settings - Triax CCAV 300 Assembly Instruction Manual

a
u d i o
In this menu you can set the audio type in which the modulator is to modulate
the audio signals. If a mono audio signal (white Cinch socket) is fed in into a
channel strip, program the respective channel strip to "Mono L". Additionally
you can adjust various audio output levels of the signal sources.
• Use
"off").
s
e t t i n g
• Feed in an external audio signal (refer to "Technical specifications").
• Use
s
av i n g
• Press the
t y p e
to set the audio type ("Stereo", "Mono L", "Mono L+R", "Dual",
—> With the setting "off" the audio sound carriers can be switched off.
This improves RF suppression when a modulator is turned off.
t h e au d i o o u t p u t
to set the audio output level.
s e t t i n gs
button.
—> The settings are saved.
—> You return to the "Selecting the cassette" menu (page 12).
—> By pressing the
item "Selecting the channel strip" without saving the programmed
data (page 13).
Bx 1A AUDIO
Stereo 0 dB
l e v e l
Bx 1A AUDIO
Stereo 0 dB
button, you will be returned to the menu
- 17 - CCAV 300