Additional Information; Troubleshooting - Pioneer DVH-340UB Operation Manual

Dvd rds receiver
Hide thumbs Also See for DVH-340UB:
Table of Contents

Advertisement

Appendix

Additional information

Troubleshooting

Common
Symptom
The power will not turn on.
The unit will not operate.
Operation with the remote con-
trol is not possible.
The unit does not operate cor-
rectly even when the appropriate
remote control buttons are
pressed.
Playback is not possible.
There is no sound.
The volume level will not rise.
The
icon is displayed, and op-
eration is not possible.
The image displayed stops
(pauses) and the unit cannot be
operated.
There is no sound.
The volume level is low.
The sound and video skip.
The aspect ratio is incorrect and
the image is stretched.
The motor sounds when the
ignition switch is turned ON (or
is turned to ACC).
No xxxx appears when a dis-
play is changed (No Title, for ex-
ample).
Subfolders cannot be played
back.
30
En
Cause
Leads and connectors are incor-
rectly connected.
The fuse is blown.
Noise and/or other factors are caus-
ing the built-in microprocessor to
operate incorrectly.
Battery power is low.
Some operations are prohibited
with certain discs.
The disc is dirty.
The type of disc loaded cannot be
played on this unit.
The disc loaded is not compatible
with this video system.
Cables are not connected correctly.
The unit is performing still, slow mo-
tion or frame-by-frame playback.
The operation is prohibited for the
disc.
The operation is not compatible
with the configuration of the disc.
The data could no longer be read
during playback.
The volume level is low.
The attenuator is on.
The unit is not firmly secured.
File size and transmission rate are
above recommended rates.
The aspect ratio setting is incorrect
for the display.
The unit is confirming whether or
not a disc is loaded.
There is no embedded text informa-
tion.
Folder repeat play has been se-
lected.
Autogood products «130»
Action (Reference page)
Confirm once more that all connections are
correct.
Rectify the cause and then replace the fuse.
Be sure to install a fuse with the same rating.
Turn the unit off and then on. (Page 9)
Load a new battery.
Try operating with another disc.
Clean the disc.
Check the disc type.
Change the disc to one that is compatible
with your video system.
Connect the cables correctly.
There is no sound during still, slow motion or
frame-by-frame playback.
This operation is not possible.
This operation is not possible.
Stop playback once, and start playback again.
Adjust the volume level.
Turn the attenuator off.
Firmly secure the unit.
Create a DivX file that is within the recom-
mended size and transmission rate.
Select the appropriate setting for your display.
(Page 24)
This is a normal operation.
Switch the display or play another track/file.
Select the repeat range again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents