Pioneer DVH-340UB Operation Manual page 18

Operating this unit
Resume playback (Bookmark)
By using the Bookmark function, you can resume
playback from a selected scene the next time the disc
is loaded.
! This function is available for DVD video.
1 During playback, press 2/
to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time. You
can bookmark up to five discs. After that, the old-
est bookmark is replaced by the new one.
To clear the bookmark on a disc, press and hold
2/ during playback.
Notes
! You can also perform this operation by press-
ing BOOKMARK on the remote control.
! You can also bookmark a disc by pressing and
holding h (eject) at the point you want to
bookmark. Next time you load the disc, play-
back will resume from the bookmarked point.
Note that you can only bookmark one disc
using this method. To clear the bookmark on a
disc, press h (eject).
Changing audio language during
playback (Multi-audio)
With DVDs that provides audio playback in different
languages and different audio systems (Dolby Digital,
DTS, etc.), you can switch between languages/audio
systems during playback.
! This function is available for DVD video, DivX and
MPEG-4.
1 Press 5/
during playback.
The audio selection icon
seconds.
2 Press 5/
while the audio selection icon is dis-
played.
The audio changes each time you press 5/
Notes
! You can also perform this operation by press-
ing AUDIO on the remote control.
! With some DVDs, DivX and MPEG-4, switch-
ing between languages/audio systems may
only be possible using a menu display.
! You can also switch between languages/audio
systems using DVD setup menu. For details,
refer to Setting the audio language on page 23.
at the point you want
is displayed for eight
.
Autogood products «130»
! Only digital output of DTS audio is possible. If
the unit's optical digital outputs are not con-
nected, select an audio setting other than
DTS.
! Display indications such as Dolby D and Mch
indicate the audio system recorded on the
DVD, DivX and MPEG-4. Depending on the
setting, playback may not be with the same
audio system as that indicated.
! Performing this operation during fast forward/
fast reverse, pause or slow motion playback
returns you to normal playback.
Changing the subtitle language
during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings, you
can switch between subtitle languages during play-
back.
! This function is available for DVD video, DivX and
MPEG-4.
1 Press 6/
during playback.
The subtitle selection icon
eight seconds.
2 Press 6/
while the subtitle selection icon is dis-
played.
The subtitle language changes each time you
press 6/ .
Notes
! You can also perform this operation by press-
ing SUBTITLE on the remote control.
! With some DVDs, DivX and MPEG-4, switch-
ing between subtitle languages may only be
possible using a menu display.
! You can also switch between subtitle lan-
guages using DVD setup menu. For details,
refer to Setting the subtitle language on page
23.
! Performing this operation during fast forward/
fast reverse, pause or slow motion playback
returns you to normal playback.
Section
02
is displayed for
17
En