Siemens SINUMERIK ONE PPU 1740 Series Equipment Manual page 90

Connectable components
8.1 NX10.3 / NX15.3
Connection example
The digital inputs/outputs are connected appropriately during commissioning.
1)
2)
3)
Figure 8-5
See also
For the pin assignment of the DRIVE-CLiQ interfaces X100 - X103, please refer to Section
"DRIVE-CLiQ (Page 77)".
For further information on DC voltage and standards, please refer to Section "Power supply
connection (Page 65)".
90
Rapid inputs must be shielded.
Jumper open, electrical isolation for digital inputs (DI)
Can be parameterized as either input or output
Connection example for the NX10.3 / NX15.3
Equipment Manual, 01/2019, A5E47615272B AA
PPU 1740