Connect To A Computer; Install Driver And Utility; Join A Wireless Network - TP-Link TL-WN881ND Quick Installation Manual

*Images may differ from actual products.

1 Connect to a Computer

Insert the adapter into your computer by following these steps:
PCI/PCI-E Slot
1. Turn off your computer, unplug the power cord and other connected
peripheral devices to your computer.
2. Remove the case panel. Locate an available PCI/PCI-E slot and remove
its slot cover.
3. Carefully insert the adapter into the PCI/PCI-E slot and secure it with
the retaining screw.
4. If your antenna is not installed, install the antenna.
5. Install the case panel.
6. Reconnect the power cord and turn on your computer.
Note: In Windows XP, a Found New Hardware Wizard window will appear when the
adapter is detected. Please click Cancel.

2 Install Driver and Utility

You can also download the driver and utility at www.tp-link.com.
A: Insert the CD and run the Autorun.exe from the pop-up window.
Note: In some operating systems, the CD screen will pop up automatically. Otherwise,
run the CD manually.
Select your adapter and click Install Driver and Utility, then follow
B:
the InstallShield Wizard to complete the installation.
TL-WN721N TL-WN722N

3 Join a Wireless Network

Option 1: Via TP-LINK Utility
Select your Wi-Fi network from the pop-up utility window and click
Connect. The symbol indicates a successful connection.
Status WPS Network Profile
Network Name(SSID) Security
TP-LINK_A
WPA/WPA2-Personal
Connect automatically
34567_TEST
WPA/WPA2-Personal
abcdef_0903
None
AAAAAA
None
Option 2: Via Windows Wireless Utility
Click (Network icon) on the system tray, select your Wi-Fi network,
and click Connect.
Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows
Wireless Utility.
Setup Wizard
TL-WN781ND
Install Driver and Utility
User Guide
Browse CD EXIT
Advanced
Channel Signal
TP-LINK_A
6 (2.4G)
Connect
34567_TEST
2 (2.4G)
9 (2.4G)
5 (2.4G)
English
Network Na
1