10/100/1000mbps gigabit ethernet pc card (16 pages)
Summary of Contents for TP-Link TL-WN881ND
Page 1
Connect to a Computer b. Locate an available PCI-E slot and carefully c. Connect the antennas to the adapter. a. Unplug the power cable and remove d. Replace the case panel, plug in the power the case panel. insert the adapter. cable and turn on your computer.
Page 2
You can also download the driver from the product’s b. Select your Wi-Fi network, click Connect, Support page at www.tp-link.com. and enter the password when prompted. 300Mbps Wireless N Select TL-WN881ND and follow the instructions to complete the installation. PCI Express Adapter Connections are available Note: If you can’t install the driver successfully, disable...