Adjusting The Rear Suspension - Honda CB 1100 2017 Owner's Manual

Adjusting the Rear Suspension

#
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Turn the adjuster using the pin spanner.
Position 1 is for a decreased spring preload
(soft), or turn to the position 3 to 5 for a
increased spring preload (hard). The
standard position is 2.
CB1100CA
Adjuster
Extension bar
Other Adjustments
1 2 3 4 5
CB1100NA
Pin
spanner
Adjusting the Rear Suspension
u
CB1100NA
Adjuster
Extension bar
NOTICE
Do not turn the adjuster beyond its limits.
Adjust both left and right shock absorbers to the
same spring preload.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
5 4 3 2 1
Pin spanner
89