Honda CB 1100 2017 Owner's Manual page 105

Remove the brake caliper bracket, rear
6.
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc to pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
CB1100NA
Support your motorcycle securely and
1.
raise the rear wheel off the ground using
the center stand or a hoist.
Loosen the rear axle nut, lock nuts and
2.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
Release the rear axle nut/washer.
3.
Tire Puncture
Pulser ring
Adjusting
Rear axle nut/washer
plate
Remove the drive chain from the driven
4.
sprocket by pushing the rear wheel
forward.
Remove the rear axle shaft and adjusting
5.
plates.
Removing Wheels
u
Wheel speed
sensor
Adjusting bolt
Lock nut
Continued
103