LG 55LV540H Owner's Manual page 32

* For Japan Model
• To tune channel to following physical/major/
minor number.
Transmission
[m][a][ ][0][ ][Data00][ ][Data01][ ][Data02][ ]
[Data03][ ][Data04][ ][Data05][Cr]
20. Channel (Programme) Add/Del(Skip)
(Command: m b)
• To skip current channel(programme) for next
time.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00: Del(ATSC,ISDB)/Skip(DVB) 01: Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
- Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21. Key (Command: m c)
• To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - page 15
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
22. Control Backlight, Control Panel Light
(Command: m g)
* For LCD TV / LED TV
• To control the backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
24
23. Input select (Command: x b) (Main Picture
Input)
• To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 00 : DTV
01 : CADTV
02 : Satellite DTV ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
20 : AV or AV1
21 : AV2
60 : RGB
90 : HDMI1
92 : HDMI3
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
Ack
[v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ]
[Set ID][ ][NG][Data00][x]
24. Auto Configure (Command: j u)
• To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
10 : ATV
11 : CATV
40 : Component1
41 : Component2
91 : HDMI2
93 : HDMI4