Related Manuals for LG 32LV761H-TA
Summary of Contents for LG 32LV761H-TA
- Page 1 LED TV LV76** LU66** (M4 X L20) (M4 X L20) 43/49/55LV76** 32LV76** 43/49LU66** : Depending on model / www.lg.com...
- Page 3 43/49/55LV76** 32LV76** 43/49LU66** 43/49/55LV76** 32LV76** 43/49LU66**...
- Page 4 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK...
- Page 5 CLOCK OPTICAL DIGITAL AUDIO OUT Satellite IN...
- Page 6 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
- Page 7 HDMI-DVI IN AV IN HDMI IN DVI OUT AUDIO OUT...
- Page 9 32LV761H-TA 6.05 4.85 32LV765H-TA 43LV761H-TA 79.4 12.45 43LV765H-TA 49LV761H-TA 1107 79.4 14.55 11.3 49LV765H-TA 55LV761H-TA 1241 19.5 16.3 55LV765H-TA AC 100-240 V ~ 50 / 60 Hz...
- Page 10 43LU661H-GA 80.8 11.2 49LU661H-GA 1110 81.1 14.5 11.3 AC 100-240 V ~ 50 / 60 Hz...
- Page 11 OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
- Page 12 Warning! Safety instructions • Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. • Insert power cable plug completely into wall socket otherwise if CAUTION not secured completely into socket, fire ignition may break out.
- Page 13 • Only use an authorized AC adapter and power cord approved by product. LG Electronics. Otherwise, this may result in fire, electric shock, • Do not turn the product On/Off by plugging-in or unplugging malfunction or product deformation.
- Page 14 Preparing • Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. • If the TV is turned on for the first time after it was shipped from •...
- Page 15 Lifting and moving the TV • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved Please note the following advice to prevent the TV from being scratched items are not covered by the manufacturer’s warranty.
- Page 16 Using the button Basic functions <A/B type> (Depending on model) Power On (Press) You can simply operate the TV functions, using the button. Power Off (Press and hold) <A type> Volume Control Programmes Control <C type> Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold...
-
Page 17: Lifting And Moving The Tv
Mounting on a table Attaching the TV to a desk (This feature is not available for all models.) 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper The TV should be attached to a desk so it cannot be pulled in a forward/ ventilation. -
Page 18: Using The Button
Using the kensington security Adjusting the angle of the TV to suit system view (This feature is not available for all models.) (This feature is not available for all models.) Swivel 20 degrees to the left or right and adjust the angle of the TV to •... -
Page 19: Mounting On A Table
We recommend the use 55UV96** 32/43LU66** of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with 49LU640* cables connected. When you do not use LG’s wall mount bracket, please VESA (A x B) (mm) -
Page 20: Using The Kensington Security System
Connections (notifications) • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model) Connect various external devices to the TV and switch input modes to select an external device. -
Page 21: Mounting On A Wall
Satellite dish connection Speaker output setup (Depending on model) (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). CI module connection EXTERNAL (Depending on model) SPEAKER OUT View the encrypted (pay) services in digital TV mode. STEREO •... -
Page 22: Connections (Notifications)
Network setup Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Wired network connection Some separate cable is not provided. (Depending on model) •... - Page 23 Remote control (POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce energy consumption. (Some buttons and services may not be provided depending on models By zooming in on the selected or regions.) area, you can view it in full screen. Changes the input source.
-
Page 24: Network Setup
(Depending on model) (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Not functional. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programmes list. -
Page 25: Remote Control
(Depending on model) (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Audio descriptions function will be enabled. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Accesses the saved programme list. - Page 26 Manufactured under license from Dolby Laboratories. Dolby, Dolby LG Electronics will also provide open source code to you on CD-ROM Vision, Dolby Audio, and the double-D symbol are trademarks of for a charge covering the cost of performing such distribution (such Dolby Laboratories.
- Page 27 Connection and use of this communications equipment is permitted by the Nigerian Communications Commission Software download information (Only LV64**) • SuperSign Software & Manual - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
-
Page 28: Open Source Software Notice Information
CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV Analogue TV (Depending on Country) -
Page 29: Specifications
HDMI/DVI-DTV supported mode HDMI/DVI-PC supported Mode • PC audio is not supported Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode (Depending on model) Frequency (Hz) Frequency (kHz) 31.469 59.94 Horizontal Vertical Resolution 640 x 480 Frequency (kHz) Frequency (Hz) 31.5 60.00... - Page 30 Component port connecting Audio format information File Item Info Component ports on the TV Format Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz .mp3 Support MPEG1, MPEG2 Video output ports on DVD player channels mono, stereo Bit rate Sample freq.
- Page 31 Video codec Extension Codec VC-1 Advanced Profile (except for Video WMVA), VC-1 Simple and Main Profiles .asf .wmv WMA Standard (except for WMA v1/ Audio WMA Speech) Xvid(except 3 warp-point GMC), H.264/ Video AVC, Motion Jpeg, MPEG-4 .avi MPEG-1 Layer I, II, MPEG-1 Layer III Audio (MP3), Dolby Digital, LPCM, ADPCM, DTS Video...
-
Page 32: Audio Format
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL... -
Page 33: Video Codec
IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button T.OPT (T.Option) Remote control Button Remote control Button Remote control Button (INPUT) Remote control Button Remote control Button Remote control Button Number Key 0-9 Remote control Button 10-19 ... - Page 34 EXTERNAL CONTROL Phone jack Type (TV) (PC) DEVICE SETUP (Depending on model) RS-232C IN • You need to purchase the phone-jack to RS-232C cable required (CONTROL & SERVICE) (PC) (TV) for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup * For other models, connect to the USB port. (PC) (TV) * The connection interface may differ from your TV. • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the (PC) (TV) (TV) (PC) product’s functions externally. RS-232C IN (CONTROL &...
-
Page 35: External Control Device Setup
2 3 • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID RS-232C IN 3 2 (CONTROL & SERVICE) (PC) (TV) : 0x2008) USB to serial converter which is not made nor provided 5 5 by LG. 4 6 • It can be purchased from computer stores that carry accessories for 6 4 (PC) (TV) IT support professionals. 7 7 ... -
Page 36: Communication Parameters
Command Reference List Transmission / Receiving Protocol (Depending on Model) (Depending on Model) DATA COMMAND1 COMMAND2 (Hexadecimal) Transmission 01. Power 00 to 01 [Command1][Command2][ ][Set ID][ ][Data][Cr] 02. Aspect Ratio (See p. 5) 03. Screen Mute (See p. 5) [Command 1] : First command to control the TV.(j, k, m or x) 04. Volume Mute 00 to 01 [Command 2] : Second command to control the TV. 05. Volume 00 to 64 [Set ID] : You can adjust the set ID to choose desired monitor ID number Control in option menu. Adjustment range is 1 to 99. When selecting Set ID 06. Contrast 00 to 64 ‘0’ , every connected set is controlled. Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/ 07. Brightness 00 to 64 receiving protocol. -
Page 37: Transmission / Receiving Protocol
01. Power (Command: k a) ► To control Power On/Off of the set. [d][ ][Set ID][ ][OK/NG][Data][x] Transmission * In case of video mute on only, TV will display On Screen [k][a][ ][Set ID][ ][Data][Cr] Display(OSD). But, in case of Screen mute on, TV will not display OSD. Data 00 : Power Off 01 : Power On 04. Volume Mute (Command: k e) Ack ► To control volume mute on/off. [a][ ][Set ID][ ][OK/NG][Data][x] You can also adjust mute using the MUTE button on remote control. ► To Show TV is Power On/Off. Transmission Transmission [k][e][ ][Set ID][ ][Data][Cr] [k][a][ ][Set ID][ ][FF][Cr] Data 00 : V olume mute on (Volume off) 01 : V olume mute off (Volume on) [a][ ][Set ID][ ][OK/NG][Data][x] [e][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘ 0 x FF’ data based on this format, Acknowledgement data feed back presents status about ... - Page 38 07. Brightness (Command: k h) 11. OSD Select (Command: k l) ► To adjust screen brightness. ► To select OSD (On Screen Display) on/off when controlling remotely. You can also adjust brightness in the PICTURE menu. Transmission Transmission [k][l][ ][Set ID][ ][Data][Cr] [k][h][ ][Set ID][ ][Data][Cr] Data 00 : O SD off 01 : OSD on Data Min : 0 0 to Max : 64 * Refer to Real data mapping. [l][ ][Set ID][ ][OK/NG][Data][x] [h][ ][Set ID][ ][OK/NG][Data][x] 12. Remote control lock mode (Command: k m) ► To lock the front panel controls on the monitor and remote control. 08. Colour (Command: k i) ► To adjust the screen Colour. Transmission [k][m][ ][Set ID][ ][Data][Cr] You can also adjust colour in the PICTURE menu. Transmission Data 00 : Lock off 01 : Lock on [k][i][ ][Set ID][ ][Data][Cr]...
- Page 39 15. Energy Saving (Command: j q) MSB LSB ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Data Frequency Transmission [j][q][ ][Set ID][ ][Data][Cr] 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) Power Saving Level Function 0 0 1 2nd Band 0 0 0 0 1 1(decimal) Description 0 1 0...
- Page 40 19. Programme Add/Skip (Command: m b) 22. Input select (Command: x b) (Main Picture Input) ► To set skip status for the current Programme. ► To select input source for main picture. Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add Data Structure MSB LSB [b][ ][Set ID][ ][OK/NG][Data][x] External Input Input Number 20. Key (Command: m c) External Input Data ► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Analogue Data IR CODES Component [c][ ][Set ID][ ][OK/NG][Data][x] 21. Control Backlight (Command: m g) HDMI ►...
- Page 41 * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255...