Whirlpool GLT3615G Use And Care Manual page 14

C A R I N G F O R Y O U R C O O K T O P
Sealed surface burners and cooktop
To clean the burners:
1. Pull the burner caps straight up from the
burner base.
2. Clean the burner caps with warm, soapy water
and a sponge. You can also clean the caps with
a mildly abrasive plastic scrubbing pad and pow-
dered cleanser. Do not clean the burner caps in
a dishwasher or self-cleaning oven.
3. If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
4. If the ports are clogged, clean them with a
14
straight pin. Do not
6. Turn on the burner to see if it will light. If the
enlarge or distort
the port. Do not
use a wooden
toothpick.
If the burner needs
to be adjusted, call a
qualified technician
for service.
5. After cleaning the gas tube opening and ports,
burner does not light after you have cleaned it,
contact a designated service technician. Do not
service the sealed burner yourself.
(cont.)
replace the burner
caps. To replace the
burner caps, make
sure the alignment
pins on the burner
base are properly
aligned with the cap.