W 350
10
Container seal
11
Suction tube
12
Container with cover
13,14,15 Ventilating hose, valve cover, diaphragm
16
Stir stick
17
Lubricating grease (no fig.)
15. Accessories
The CLICK&PAINT SYSTEM with additional spray attachments and accessories offers
the right tool for each work.
Further information about the WAGNER range of products for renovating is
available under www.wagner-group.com
16. Correction of Malfunctions
Problem
No coating
material
emerges from
the nozzle
Coating
material drips
from the nozzle
Atomisation too
coarse
Spray jet
pulsates
Spare Parts List (Fig. 9)
Cause
•
Nozzle clogged
•
Feed tube clogged
•
Material volume too small
•
Feed tube loose
•
No pressure build-up in container
•
Nozzle loose
•
Nozzle worn
•
Nozzle seal is missing or worn
•
Coating material assembly at air
cap, nozzle or needle
•
Viscosity of coating material too
high
•
Material volume too large
•
Nozzle contaminated
•
Air filter heavily soiled
•
Too little pressure build-up in
container
•
Coating material in container
running out
•
Air filter heavily soiled
•
Nozzle seal is missing or worn
2323 039
2362 876
0413 909
2304 027
2304 419
2315 539
Remedy
➞ Clean
➞ Clean
➞ Increase the quantity of
material
➞ Insert
➞ Tighten container
➞ Tighten
➞ Change
➞ Insert an intact nozzle seal
➞ Clean
➞ Thin
➞ Reduce the material
➞ volume
➞ Clean
➞ Change
➞ Tighten container
➞ Refill
➞ Change
➞ Insert an intact nozzle seal
AUS
9