Bosch B1 RKM 09001 Instructions For Use Manual page 30

Things that can save you from
making unnecessary phone calls
What to do if ...
... the appliance does not
work ...
... the appliance does not
work and the safety light
is flashing ...
... the safety pilot light
comes on frequently ...
... the appliance fails to cool
the air properly ...
30
The following procedures can help you solve a
number of small problems and save you from
contacting our Technical Service unnecessarily.
If after performing the procedures described the
problem persists or happens again, then contact
our specialised technicians.
Make sure that the appliance is plugged in properly.
Make sure that there is power in the mains
electricity supply and all the fuses are in working
o r d e r.
Select a lower temperature with the
Place the appliance on a flat surface. If the pilot
light still doesn't go out, then empty the appliance's
internal water tank. (See instructions for
Temperature Control or Dehumidification).
Make sure that the drainage stopcock is set to the
right position.
Make sure that the connections on hot-air expulsion
duct are in working order.
Make sure that the expulsion duct is not
excessively bent or longer than 140 cm.
Make sure that drainage stopcock is set to the
temperature control position.
Use the suction pad to make the opening on the
window as small as possible.
Lower blinds if available to reduce direct sunlight.
b u t t o n .