Bosch B1 RKM 09001 Instructions For Use Manual page 23

Instructions for Use
Temperature
control
Plug your appliance in.
Lead the hot-air expulsion duct outdoors.
Set to maximum
control.
Turn the drainage stopcock to the cooling
position.
Set the required temperature with the
buttons.
The appliance lowers the temperature and dries
the air in the room at the same time in order to
create ideal air conditions.
If the appliance turns itself off due to the
thermostat, it will come back on again
automatically when the ambient temperature
rises 2°C!
Condensed water formed during air conditioning
evaporates automatically and is expelled
outdoors, together with hot air, through the hot-
air expulsion duct.
In conditions of extreme humidity, the appliance
accumulates water in an internal tank.
When the water in this tank reaches a certain
level, safety pilot light comes on, indicating that
the tank needs to be emptied.
You may also use the Dehumidification Mode to
empty the water. To do this,
first turn the appliance off and wait 10 minutes in
order for the safety systems to reset. Having
done this, proceed as described in the section
"Dehumidification".
or silent temperature
and
23