Advertisement
5
Rev3.1
BASS-SB1
6
Coil Tap Mode Select
Neck
Bridge
4-String Bridge
4-String Neck
5-String Bridge
5-String Neck
PAT. 8,519,251
Fluence Bass – Connection Points & Functions
1
1. Mid Flat - This feature bypasses the mid contour on Voice 2, and
2
works in both Humbucking and Single Coil mode.
3
To activate, connect the Mid Flat wire to ground, either wired
through a switch or permanently to a ground source within the cavity.
2. Voice-2 Select Wire - To select Voice-2, connect this pin to ground
through a switch contact or permanently by soldering it to any
ground or by using one of the included jumpers across the pins.
4
This pin is an electronically controlled switch and has no signal on
it. It can share a switch contact with other voice select wires without
interaction.
6
Advertisement
