5.1.4
Device operating modes
Table 5- 2
Mode
Coded display mode
Decoded display mode
Operator control mode
OXYMAT 64
Operating Instructions, 06/2008, A5E00880383-03
Operating modes
Properties
Measured value display is
•
shown
Protected submenus can
•
only be reached by entering
a code
The current operating state
•
of the device (except for
"Measure") is displayed in
the bottom line
Functional check not active
•
Measured value display is
•
shown
The submenus protected by
•
the entered code are
accessible
The current operating state
•
of the device (except for
"Measure") is displayed in
the bottom line
Functional check active
•
Measured value can be
•
influenced
Menu or function is
•
displayed
Settings and inputs can be
•
made
Functional check active
•
Measured value can be
•
influenced
5.1 General information about operation
Remarks
The device only supplies
reliable measured values in this
mode, as far as it's in the
"Measure" operating state. From
the operator control mode, you
can reach this mode by pressing
the [MEAS] button twice.
From the operator control mode,
you can reach this mode by
pressing the [MEAS] button
once and confirming or
discarding the made entries.
From "Coded display mode" you
can reach this mode by entering
the code of the corresponding
operation level.
In this mode, you can
parameterize/calibrate the
device.
Operation
45