Details Of User Operation Change (Version 2.00); Combination Of Geometry Correction; Change Hdmi Out Setting; Reset Schedule Setting - Epson BrightLink 1485Fi User Manual Supplement

Details of User Operation Change (Version 2.00)

Refer to these sections for details on changes to user operations.
g g Related Links
• "Combination of Geometry Correction"
• "Change HDMI Out Setting" p.19
• "Reset Schedule Setting" p.19
• "Computer Interactive Mode for Screen Mirroring Source"
• "Outputting Screen Mirroring Image to HDMI Out Port"
• "Screen Sharing Guidance Screen for Receiving Projector"

Combination of Geometry Correction

You can use several geometry correction types in combination. By using
several correction types in combination, you can first make approximate
corrections, and then make precise corrections as described in the examples
below.
• After you use Arc Correction, you can perform Quick Corner, and then
Point Correction.
• After you use Quick Corner, you can perform Point Correction.
Previous Geometry Correction Operation (Version 1.00)
You cannot use several geometry correction types in combination.
New Geometry Correction Operation (Version 2.00)
When you select the Arc Correction or Point Correction setting, you can
switch to the correction type you want to use in combination.

Change HDMI Out Setting

When you change the Number of Projectors or the Order setting in the
HDMI Out Setting, you may need to restart your projector so that the
projector features work correctly.
p.19
p.19
p.20
p.20
Previous HDMI Out Setting Operation (Version 1.00)
When you change the Number of Projectors or the Order setting in the
HDMI Out Setting, restarting is not required.
New HDMI Out Setting Operation (Version 2.00)
When you change the Number of Projectors or the Order setting in the
HDMI Out Setting, you see a message prompting you to restart the projector.
Follow the on-screen instructions to restart the projector.

Reset Schedule Setting

You can reset the Schedule Settings by selecting the Reset Management or
Reset All option.
Previous Reset Operation (Version 1.00)
You cannot reset the Schedule Settings.
New Reset Operation (Version 2.00)
When you select the Reset Management or Reset All option, you can reset
the Schedule Settings.
Computer Interactive Mode for Screen Mirroring
Source
When the projector is connected to a computer with a Screen Mirroring, you
can operate the computer from the projected screen using the interactive pens
or your finger, just as you would use with a mouse.
Previous Interactive Operation (Version 1.00)
When the projector is connected to a computer with a Screen Mirroring, you
cannot operate the computer using the interactive pens or your finger.
19