EcoVision EZ Door Upgrade
3
Remove color panel and bumper as
shown in Figure 3-1.
A. Set bumper aside. Bumper will be rein-
stalled after doors are installed.
Figure 3-1 — Remove Panel and Bumper
Do not leave merchandisers unsupported
or unattended until all parts are
properly secured.
The Case(s) are now ready to be outfitted
Refer to the door part identifications on the next page to
become familiar with the standard case parts.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Color
Panel
Remove
Bumper
with EcoVision EZ Doors.
1
4
Remove the
/
in. screws from the
4
Impact front rail extrusion.
A. Remove rail extrusion and discard. New
rail extrusion will be installed later.
Figure 4-1 — Remove Front Rail
Figure 4-2— Remove Front Rail
P/N 558756_C
Impact
Rail Extrusion
(Removed)
Remove Rail
Extrusion
Screws
Remove Rail
Extrusion
Screws
3