Table of Contents
Advertisement
EcoVision EZ Door Upgrade
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during unloading.
This equipment has been carefully inspected at
our factory. Any claim for loss or damage must
be made to the carrier. The carrier will provide
any necessary inspection reports and/or claim
forms.
GENERAL
Verify the merchandiser model(s) to be outfitted
with the EcoVision EZ door kit(s) by locating
the merchandiser's serial plate. The serial plate
is located on the inside of the foam bottom at
the left side of the merchandiser.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
EcoVision EZ doors may be installed without
the need to remove product from the merchan-
disers. Check with the store manager, and let
them know how long a door lineup will take to
complete. The average time to install each door
is about 10 minutes.
N
Narrow Impact cases require additional brackets when
outfitting with doors. See Page 9 for bracket installation
details.
W
M
L
r
ater
isters and
ight
glass doors. Remove any mist equipment from case
before installing doors.
Do NOT lean glass doors against the
merchandiser lineup. Leave them packed in
their protective packaging until they are
ready to be directly installed in the lineup.
Accidental glass breakage can be dangerous.
Always wear protective safety glasses and
gloves when handling glass.
P/N 558756_C
ote
may not be used with
aiLs
1
Advertisement
Table of Contents
