Nvidia DGX A100 Service Manual page 77

Item Description
‣
Use a Phillips screwdriver to assist in mounting the rails to the rack.
‣
Follow any designations on the slide rail to determine front/back and left-side/right-side
positioning against the rack.
1. Align the bottom lip of the left or right rail to the bottom of the first rack unit for the server.
2. Attach the front of the rail to the rack.
Push the metal tab on the rail and then insert the two spring-loaded prongs into the holes
on the front rack post.
On square-holed racks, make sure the prongs are completely inserted into the hole by
confirming that the spring is fully extended.
The metal clip helps secure the rail in place while installing the rail to the rear of the rack.
3. Extend the rail to the rear post of the rack and secure the rail to the post.
Make sure that rail is level and the attachment on the rear post is at the same rack unit as
the front.
a). Insert the spring-loaded prongs into the holes on the rear rack post.
NVIDIA DGX A100 System
Installing the Rack Mount Kit
DU-10044-001 _v01 | 71